ATI support

[Mike Chambers]

On Tue, 2007-03-20 at 11:43 +0100, Matthias Saou wrote:
> Mike Chambers wrote :
> 
> > Does ATI/Your Rpms support current Fedora devel (as in FC7t?)?  Or do I
> > have to run FC6+updates+your rpms to get ATI drivers to work with a
> > Radeon X1300?
> 
> I honestly have no idea. I can't think of any reason why they wouldn't
> run on F7 if they do on FC6, though.
> One thing I can tell you is that the only laptop I've tested with an
> X1300 couldn't get the full native resolution with the free radeon
> driver (FC6), so I had to use the proprietary one, but XV doesn't work
> and X often crashes right after logging into GNOME...

Well, this is actually a desktop.  I got it running via vesa on an FC6
+updates system, and have your ati-x11-drv package installed.  I believe
fglrx module is loading (yes it's in my config), but no dri and maybe
few others.  I am going to post my config file to see if anyone see's
something that needs to be added to my config to get it fully
functional? (glx gears shows no dri and runs slow)

The .old is what FC6 configures w/fglrx.  The xorg.conf one is my
current that I used to have for earlier FC versions, when I used to use
a Radeon 9000 when it was supported.  But still no dri on neither config
file.

-- 
Mike Chambers
Madisonville, KY

"Sex is like air, it's not important unless your not getting any!"
-------------- next part --------------
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	ModelName    "KDS XFlat XF-9b/XF-9c/XF-9e/XF-9p"
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 98.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

-------------- next part --------------
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
#	FontPath     "/usr/share/X11/fonts/misc"
# 	FontPath     "/usr/share/X11/fonts/75dpi"
#       FontPath     "/usr/share/X11/fonts/100dpi"
#       FontPath     "/usr/share/X11/fonts/Type1"
#       FontPath     "/usr/share/X11/fonts/TTF"
#	FontPath     "/usr/share/X11/fonts/util"
#       FontPath     "/usr/share/fonts/default/Type1"
#	FontPath     "/usr/share/fonts/bitmap-fonts"
#	FontPath     "/usr/share/fonts/bitstream-vera"
#	FontPath     "/usr/share/fonts/default/ghostscript"
#	FontPath     "/usr/share/fonts/msfonts"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "KDS XFlat XF-9b/XF-9c/XF-9e/XF-9p"
	DisplaySize  360	260
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 98.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "fglrx"
	VendorName  "Videocard vendor"
	BoardName   "ATI Technologies Inc Radeon RV250 If [Radeon 9000]"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection